In woodworking, there is no alternative to clamps. This super handy tool helps us hold our work pieces together while the glue dries out. But as convenient as this tool is, you won’t be able to get the best results without a suitable clamp.
So, today, in this article, I have compiled a list of 5 f the best clamps for cutting boards after extensive research. After this article, you won’t have to worry about getting the right clamp again. So, w without further ado, let’s begin.
OUR TOP 4 BEST CLAMPS FOR CUTTING BOARDS
|IRWIN QUICK-GRIP Clamps||Item Dimensions LxWxH
21 x 8 x 2.5 inches
|Jorgensen Bar Clamp Set||Item Dimensions LxWxH
6.5 x 3.35 x 14.37 inches
|WORKPRO Bar Clamps||Item Dimensions LxWxH
17.13 x 12.2 x 2.48 inches
|PONY 50 Clamp||Item Dimensions LxWxH
5.25 x 2 x 8.5 inches
|y&y Pipe Clamp||Item Dimensions LxWxH
14.57 x 10.51 x 3.23 inches
Our Top Products Review
What Will I Learn?
- 1 IRWIN QUICK-GRIP Clamps
- 2 Jorgensen Spreader/Bar Clamp Set
- 3 WORKPRO Bar Clamps
- 4 PONY 50 pipe clamp set
- 5 Y&Y Decor Wood Gluing Pipe Clamp Set
- 6 How many clamps are for the cutting board?
- 7 How thick should a cutting board be?
- 8 Clamp types for cutting boards?
- 9 What to Consider When Choosing the Best Clamps for cutting Board
- 10 FAQ
- 11 Conclusion
IRWIN QUICK-GRIP Clamps
The first option on my list is the Irwin quick-grip clamps. If you are looking for a moderate-sized 4-pack clamp, this set has everything you’ll ever need. For the price range, the resin construction is more e than decent. With one hand, you can operate this clamp pretty easily.
As per the specification, this clamping set has a combined force of 150 lbs. distributed across the set. You don’t have to worry about that force damaging your wood either. There is a non-marring pad equipped to prevent that.
- Durable resin construction
- Non-marring pad for surface protection
- Affordable price
- Balanced clamping force of 150 lbs.
- The design could have been smaller
- The packing is not satisfactory
Why should you buy it?
Considering the price tag, this clamping set provides everything a good option should offer you. It can easily handle any DIY and semiprofessional projects easily.
Jorgensen Spreader/Bar Clamp Set
The second place on my list goes to a clamping set similar to the previous one, but this time with a more attractive pricier tag. I am talking about the Jorgensen clamp set here. Right off the bat, the material might be a concern for some.
But considering affordability, you should give it an easy pass. Moreover, this lacking doesn’t take away anything from its functionality. Jorgensen’s E-Z hold design allows the clamp to be used both as a bar clamp and spreader clamp.
- Affordable price tag
- E-Z hold design for versatile use
- One-hand handling
- Soft and durable plastic pads for surface protection
- The release trigger feels a bit weird to operate
- Clamping force lacks consistency
Why should you buy it?
Apart from the unique or, as some might say, weird release trigger, Jorgensen provides the most balanced product for the money. You can’t go wrong with this clamp set, especially with smaller projects.
WORKPRO Bar Clamps
Next up on our list is the WORKPRO bar clamp set. If you are looking for more clamps for bigger projects, you can check this out since WORKPRO provided six clamps for the price of four. Despite more clamps, the manufacturer kept the build quality intact with reinforced nylon and hardened steel.
Like the previous clamp set, this one can be used both as a clamper and spreader. The clamping force is pretty standard, too for the price, a solid 150 lbs. For added versatility, there are four 6″ clamps and two 12″ clamps.
- It can be used as both spreader and bar clamp
- Total six units of clamps with different sizes
- Solid nylon and steel construction
- Removable and replaceable non-marring pads
- It loses clamp force overtime
Why should you buy it?
If you are looking for the most versatile clamp set, this is the option to invest in. Moreover, the rigid construction and non-marring pads are also here to complement these excellent clamps.
PONY 50 pipe clamp set
After bar clamp sets, I brought you this excellent pipe clamp set to introduce you to a different territory. Unlike bar clamps, there are no size restrictions here. You can use any length of pie as long as it has ¾ inch radius.
Cast iron is used to construct this whole set, which means it can work through any workplace abuse with ease. Pony 50 also features a multi-disc clutch design to offer you solid and consistent force along the pipe.
- Rigid cast-iron frame
- Compatible with pipe up to ¾ inch
- It comes with a 2-pieced pony pipe clamp
- Multi-disc clutch for consistent force
- No clamp pads
- Some units have rusting issues
Why should you buy it?
If you are looking for a different option other than bar clamp, this option is definitely worth checking out. This clamp is an excellent buy with its solid construction and reasonable price.
Y&Y Decor Wood Gluing Pipe Clamp Set
I am wrapping it up with another pipe clamp for you. You’ll surely love this clamp set if you prefer pipe clamps or bar clamps. First, this set has lots of similarities with the previous options. Even with the smaller ½ inch pipe compatibility, this pipe clamp is a great choice for DIYers.
You are getting almost everything for a decent price tag, including a multi-disc clutch, solid iron construction, and quick release feature. At the same time, this clamp set has excellent hold and is easy to use.
- A solid lock on ½ inch pipes
- Reasonable price
- Multi-disc clutch for consistent clamping force
- Easy one-hand functionality
- Some unit’s holes have rounding issues
Why should you buy it?
Sturdy, light, and affordable, these three words are enough to describe how amazing this clamp set is. For woodworking projects, it’s hard to go wrong with something like this.
How many clamps are for the cutting board?
The answer to this question depends on the cutting board you have. It also depends on the projects you are planning to complete.
If your work pieces are going to be big, as well as the cutting board, then you’ll need more clamps according to your project size.
How thick should a cutting board be?
There is no fixed thickness here. However, thickness between ¾ inch to 2 inches is considered the ideal ballpark here. Too thin, and it might lack durability, and if it’s too thick, it might be hard to relocate and carry around.
Clamp types for cutting boards?
The type of clamp you’ll need depends on your particular project. Clamps for the cutting board can be used at different positions for different purposes.
Different kinds of clamps for wood cutting boards include face clamps, pipe clamps, c-clamps, and right-angle clamps.
What to Consider When Choosing the Best Clamps for cutting Board
As different manufacturers are entering the industry of cutting board clamps, the demand is skyrocketing right now. In this big mess of different options, it can be challenging for a new DIYer to pick a product according to the budget and value.
That’s why I have created this guide to discuss aspects you should consider before purchasing a clamp for cutting board. Let’s have a look.
The durability of your clamp depends on the material used to manufacture it. So, it’s the first and most important thing to check out. Most budget options on the market are made of aluminum or resin.
For the affordable price tag, they are decent choices. Otherwise, you should go for something like cast iron or steel if you have a higher budget.
Length is another important factor. If you don’t consider it, the chances are that you’ll find the clamp not fitting your work pieces. Choosing the length is pretty straightforward; go with the length of your work piece size range.
A clamp needs to have the perfect force to work correctly. So, when purchasing a clamp, make sure the force is right to ensure functionality. Too much force can damage the wood, while lack of force can make the clamp ineffective.
Depending on the type of clamp, the design typically tends to vary. Now, which design you need to go for is entirely up to you. Just choose the design that suits the best with your project, and you should be good to go.
The safeguard of the work piece is equally essential. You have to ensure the clamping force doesn’t leave any sport or stress mark on your wood surface. Ensure your clamp comes with a plastic or rubber cap to protect the clamped surface.
Woodworking needs precision for different projects. So, in that regard, the ergonomics of your clamp can take you a long way towards a successfully executed project.
Look for clamps that have an ergonomic design for better usability and handling.
This one might not be a consideration for everyone. If you are trying to get different jobs done with a single set of clamps, then you should look for something versatile. C-clamp is a food example of a versatile clamp as it can be used for different projects.
A: Gluing and clamping a cutting board is pretty straightforward. First, lay the workpieces on a clamp and make sure they are equally cute. Then put glue across the side of the pieces and lock them together tightly with your clamp.
A: Not all woods are perfect for cutting boards. Whether it’s wood toxicity or open pores, there are some woods you should avoid for cutting boards. Usually, users are advised not to use oak and walnut for the open pores and bad flavor contribution.
A: As oak is particularly known for its’s durability, many of you might mistake it as the ideal choice for citing boards. But in reality, oak has considerably large pores. Because the food tends to get stuck there, and cleaning becomes challenging.
A: Yes, they are entirely safe.Moreover, this native North American tree has the perfect blend of rigid structure and aesthetics.
Here we are at the end of my review. I hope my writing was helpful enough to give you a new perspective on clamps for cutting boards. Now that you know what you should consider while choosing a clamp for the cutting board, the decision should be much easier for you.
Now all you have to do is just pick the clamp according to your need from the list above and get to work.
I am Imtiaj Islam. I am a wood working enthusiast, having 6 years of experience in carpentry work. I have a BBA graduate degree from Chittagong College. I got vocational training on wood works from Korean Polytechnic out of the quest and zest he has for carpentry as well. I take several wood projects and keep testing different woodworking tools for comfortable and perfect work. I just love playing with woods and machines.