While deciding on a blade for a milter saw, it becomes a little confusing as to which blade to choose concerning the blade’s tooth. I’ve seen many people find themselves struggling at this point.
Therefore, in this write-up, I’ll let you know the common differences between both, and you’ll also get to know which one is better to use for a milter saw.
What Will I Learn?
Is It Better To Have More Teeth On A Miter Saw Blade?
The general rule of thumb says the more teeth, the better and smoother cut that blade will give while cutting a wooden material.
However, there are certain conditions with these teeth of the milter saw blades. A blade will 60 tooth cuts faster and doesn’t get hot, whereas the same 80-tooth blade will be a little slower in cutting and get a little heat up.
But a blade with 80 teeth will perform great in giving you the smoothest cuts. Moreover, it also depends on what type of material you are cutting with either tooth blade. A 60-tooth blade is perfect for cutting thicker stuff such as hardwood.
In contrast, an 80-tooth blade is best for cutting more delicate materials where you are concerned to obtain the smoothest cuts.
Related Article: 40 tooth vs 24 Blade
60 Vs 80 Tooth Miter Saw Blade Difference
To know more about these two milters’ saw blades, let’s compare them to their most fundamental factors. These factors are explained as follows.
Usually, on a milter saw, we either fit a 10-inch blade with 60 teeth or a 12 inches blade with 80 teeth. Therefore, these both vary in size.
Hardly there will be blades you may find in 10 inches and giving you the 12 teeth. But a perfect blade with 12 inches size would give you 80 teeth.
Just ensure what size blade fits best on your milter saw and get that for yourself.
With a 60-milter saw blade, you will get 60 teeth individually created on the blade’s surface. On the other hand, an 80-milter saw blade comes with 80 teeth.
Both are designed to cut different types of material and keep different objectives. When a 60-tooth blade is used on a milter saw, we are actually aiming for less friction, faster cutting, and less blade destruction.
At the same time, an 80-tooth milter saw a table is an excellent tool for having smoother cuts, but it usually gets hotter and shows more friction.
It doesn’t matter if you buy a 60-tooth blade for the milter saw or 80 teeth; these come in various materials. But the most common construction is the stainless-steel construction.
Except some blades also have tungsten carbide tips. These tips are mounted on the teeth to make them stand better while cutting wood.
Either it will be an 80-tooth blade or a 60-tooth blade for your milter saw, so these blades come in enormous sizes.
Here, you can find the most common sizes of 180, 300, and 250 mm blades. Every one of these has its own cutting capacity.
60 Tooth Miter Saw Blade
You can buy any brand’s 60-milter saw blade to fit it on your miter saw. Use it for different wood-cutting applications.
What Is A 60 Tooth Miter Saw Blade Used For?
A 60-tooth milter saw blade is usually designed to be used for all-purpose cutting. But if you’d use it for precise and faster cuts, it would be better.
Many wood-cutting project finishers recommend using this blade over table saws or miter saws, and others where they are looking for faster productivity.
A 60-tooth milter saw will not assume much friction. But you have to be sure that the cuts would be slightly less smooth than a blade with 80 teeth.
How Does It Work?
On a miter saw, the blade works fine. You can have it for cutting plywood, hardwood, manufactured wood, and other on-the-table cutting applications.
60 Tooth Miter Saw Blade pros & Cons
- Less with friction
- Faster cuts
- It doesn’t get hot
- Designed for cutting extreme-duty materials
- It doesn’t provide smoother cuts
80 Miter Tooth Saw Blade
The same is the thing with an 80-tooth miter saw table blade. You can buy it from any brand out there and install it on your miter saw. It will work just according to your desires.
What Is A 80 Tooth Miter Saw Blade Used For?
This blade also comes in the category of all-purpose cuttings. One can use it to get the smoothest cuts and more précised cutting for those hardwood materials.
Such a blade is best for projects requiring minimal or no tear-out.
How Does It Work?
Get the blade and install it on the milter saw. Place any wood into the cutting angle and perform the required cuts. The blade will work amazingly fine if you cut plain wooden planks or wood grains.
80-Tooth Miter Saw Blade pros & Cons
- Smoothest cuts
- Less tear out
- Better where you want more precision
- Works longer
- Not recommended for faster cutting
- Tend to be more friction observer
Frequently Asked Questions
Experienced wood cutters suggest that you should always have at least 3 teeth in the working every time. The optimum number for this is 6 to 9 teeth. But if you go with the 20 teeth, there will be a lot of teeth at work.
In case you want the smoothest cuts with a milter saw blade, choose the one with more teeth. Though it will be with a lot of friction, the cuts will be the desired ones.
Go with either tooth blade on your miter saw, and it will perform a great job or require cutting.
However, some factors should be considered regarding the blade size compatible with your miter saw.
Also, you will have to remember the type of wood you are cutting and the results you are aiming for with either tooth blade. You will nail it!
Our Another Article
- How to use a dado blade in table saw
- using dado blade without a throat plate
- how use a dado blade
- Dado blade set review
- Are all reciprocating blades universal
I am Imtiaj Islam. I am a wood working enthusiast, having 6 years of experience in carpentry work. I have a BBA graduate degree from Chittagong College. I got vocational training on wood works from Korean Polytechnic out of the quest and zest he has for carpentry as well. I take several wood projects and keep testing different woodworking tools for comfortable and perfect work. I just love playing with woods and machines.